Reviews. Resources. Specifications.

Heatvape Invader Instructions

Operation Guide

  1. Battery assembly: put two 18650 batteries in the device and it will power on for self testing.
  2. Start: press the fire button 3 times to enter the menu settings mode, these menu items will be shown on display:
    power on/off, voltage mode, wattage mode, calender and exit menu mode. Press "+" to move cursor right; press "-" to move cursor left. 
  3. Power on/off: move the cursor to the on/off icon and press the main button to enter boot mode until the screen shows "POWER ON". It will be powered off after you repeat the same operation. 
  4. Voltage mode: press the main button 3 times to enter the menu settings mode. Move the cursor to "V" icon and press the fire button. Then it display the voltage mode. You can change the voltage by pressing the "+" or "-". 
  5. Wattage mode: press the main button 3 times to enter the menu settings mode. Move the cursor to "W" icon and press the fire button. Then it display the voltage mode. You can change the voltage by pressing the "+" or "-". 
  6. Calender: press the main button 3 times to enter the menu settings mode. Move the cursor to the calender mode icon and press the fire button to enter the date and time setting. The screen will show the time, date, month and year. Press the fire button to move the cursor and press "+" or "-" to change. 
  7. Exit menu: press the main button 3 times to enter the menu settings mode. Move the cursor to the exit menu icon and press the fire button to exit the menu.

Other features:

  • Battery charging: Use micro USB charger (5v, current >800mA), the screen will show charging bar and the current capacity status. When the battery is charged or has stopped charging, the screen will turn off and switch to hibernation.
  • LED flashlight: power on the device, flashlight will work or stop work by holding the button "-" for 2 seconds. (On the main interface, LED flashlight can not work.)
  • Power bank: Voltage output = 4.8V-5.2V current output >1.1A. In "power on" mode, press and hold "+" for 2 seconds, the power bank will turn on then charge with short-circuit protection. 
  • 10 Seconds cut off: in the main interface, press and hold the main button to smoke. Display shows puffing time. If the time exceeds 10 seconds, the system will switch power off and will display "time over". 
  • Low-voltage warning: if the voltage of the battery is lower than 6.5+/- 0.1V, the display will show "low-voltage" with no output while pressing "firing button". 
  • Short circuit warning: if the atomizer is short circuited, the display will show "output short" and disable power output. 

Comments