Reviews. Resources. Specifications.

Pioneer4You IPV3 LI Firmware Upgrade (200W)

Before you upgrade the firmware in the IPV 3 LI, you need to first remove the batteries.

For Windows PC only: download and install the Yihi SXI software from http://www.yihiecigar.com/down/uploadfile/y3/yihiecigar5183/download/Other/YiHi-SXi-Setup-v20150522-1621.rar.html

You may have to reboot your PC after the installation.

Download the Yihi SX330 IPV 3 LI 200 watt upgrade firmware from http://www.yihiecigar.com/down/uploadfile/y3/yihiecigar5183/download/Other/SX330-iPV3Li-Upgrade-200W-V1.6-20150623-1435556516.rar.html

This download is in a RAR compressed file. Open that and extract the file with the extension .sxi and save that on your computer.

Launch the Yihi SXI program.

With the batteries removed from the IPV 3 LI, use the supplied cable to connect to the micro USB port at the bottom of the device.

From the main screen, select the "Connection" icon and then press the "Connect" button. The program should say "Device Connected". If it doesn't, click on the "Install Driver" button and choose IPV 3 LI. Then click on the top button (SXI).

From the main screen, select the "Upgrade" icon and then press the "Open File" button. Select the firmware upgrade file you saved to your computer and then click on the "Upgrade" button. The software will display a progress bar indicating percentage completed. When done, you can shut down the software and remove the USB cable, put the batteries back in and click the Fire button five times.

To confirm you have upgraded the firmware, set the device to Power mode, then Exit 'On'. You can use the + button to go through the wattage settings and it should go all the way up to 200W.

Comments