Reviews. Resources. Specifications.

Freemax Starre Pro User Instructions

Starre Pro Tank Basic information

Size: 79mm(L)*22.00mm(D)
Capacity: 4ml
Ni200 Sub ohm Resistance:
 – 0.15O(20W-100W)
 – 0.25O(20W-80W)
Normal Sub ohm Resistance:
 – 0.25O(20W-120W)
 – 0.5O(20W-60W)

E-Liquid Refilling

Unscrew the rotating cover, and refill the e-liquid by needle e-liquid by needle tipped e-liquid bottle.

Starre Pro is top filling design for e-liquid, please do NOT refill at the bottom.

Please turn the top twist switch to "OFF" to prevent e-liquid leakage when you  screw on the rotating cover.

Replacing the Coil

  1. Unscrew the bottom airflow control base
  2. Unscrew and remove the old coil head
  3. Drip few drops of e-liquid into the new coil head to wet the cotton wick
  4. Screw the base into the tank and refill with e-liquid
  5. Keep the tank upright for 2 to 5 minutes after refilling to help prime the e liquid

How to use Ni200 Coil

Keep the tank upright for 2 to 5 minutes after refilling. When ready to use, fire the battery starting at a low power/temperature and gradually increasing the power/temperature to your preferred level.

Application Notes

  1. Starre Pro is top filling design for e-liquid, do NOT refill at the bottom
  2. The working temperature of Starre Pro is between 200°-600° F (0.15 ohm @ 20W-100W; 0.25ohm @ 20W-80W), transition gradually from low power to high power
  3. Tighten the coil into the base when refilling the tank
  4. Please turn the twist switch to "ON" to prevent e-liquid leakage when you  screw on the rotating cover
  5. Keep the tank upright for 2 to 5 minutes after refilling to help prime the e liquid
  6. Do not fire the battery before filling the atomizer. If the tank is not properly filled and primed you could end up with:
    • A:burned organic cotton (Once organic cotton is burned, it can not recover and you will end up with continued burned taste)
    • B:dry hits
  7. Ensure your device supports Sub-Ohm coil at 0.15 Ohm to use the Starre Pro
  8. Use caution with the glass portion of the tank - it is glass and may break

Comments